![]() ![]() Check that the sheets of metal are joined, and that the rivet is secure, and then try again on another part of the sheet. You can then fit another pop rivet in exactly the same way, or you can choose to smooth down your rivet, in order to get rid of any sharp edges caused when the pin broke away. You can then turn the tool around, and watch it spit out the pin. Once the pin has broken, the manual pop rivet gun will pull free of the rivet and hole. This is the breaking of the pin, and indicates that the rivet is secured to the metal sheets. For hobbyists or professionals who use rivets for simple jobs and repairs, having a manual pop rivet tool. ![]() The gun is fed over the rivets mandrel (a shaft protruding from the rivet head) and the rivet tail is. Repeat until you hear a popping noise from the end of the gun. Rather, a pop rivet gun will form a rivet in-place. Release the handle, and ensure that the tool is tight to the top of the rivet, and then pull the handle again. Step 1: Types of POP Rivets Lets start with some basic terminology, so that we are all on the same page. ![]() Push down, and pull the handle of the rivet gun until you feel resistance. Make sure that the rivet comes through both sheets of metal at once (you may wish to look underneath and check), and is not impeded. Push the head of the rivet through the holes in the sheets of metal. Release the trigger so that the rivet is held in place. Your rivet should have the pin facing towards the back of the gun, with the head extended between the teeth. Push the metal rivet into the tool as far as possible, so that the rivet is resting on a chuck at the back of the gun. Take your rivet in one hand, and with the other press the trigger, so the holding arms are open. Put two sheets of metal side-by-side and overlap holes so that you can fit the rivet. These can be ready-drilled, or you can make small holes in them using a drill. Rivets are made of light metal, and can sometimes break, so it is a good idea to be fully protected. Before you do anything else, you should put on your safety gloves and glasses. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |